BTP-L580IIC User’s Manual
- 10 -
4.7 Install paper roll
4.7.1 Confirm
paper
type
Paper can be installed after the connection of power cable and interface cable. But before
starting printing, the paper type must be confirmed first.
4.7.2
Install/replace paper roll
1) Turn off the printer;
2) Press the cover open lever to lift up and open the top cover;
3) Place a paper roll into the paper cabinet;
4) Pull the paper head out, close top cover and tear off the surplus portion of the paper.
Caution:
Adjust the paper guide according to the paper specification as follows: adjust paper guide
to the maximum width and place paper roll into paper cabinet; move paper guide to the
proper position by turning thumb wheel according to paper width (1mm gap must be
reserved between paper guide and paper roll in case paper roll is jammed); the paper roll
should be rolled according to the requirements of the printer;
Ensure that the paper roll is rolled tightly; otherwise paper jam or other error may occur.
The paper roll should be placed in the paper cabinet stably without inclination; otherwise it
may affect the printing.
