BTP-L580IIC User’s Manual
- 5 -
To ensure print effect, do not let hard objects scratch the thermal layer;
When the temperature exceeds 70°C, the thermal layer will fade. Thus, do not use or
store the paper in a place exposed to high temperature, high humidity, strong light, etc.;
The mark is measured when printing or feeding paper. If the sensor detects the mark is
higher than the default setting (default setting is 13mm), the printer will enter paper end
error status.
2.4 Print and tear-off position
2.4.1 Print
position
L1 paper cabinet width: 83.5+0/-0.5mm
L2 effective print width: 80mm
L3 distance from print head to left edge of paper cabinet (fixed width): 1.75±1mm
L4 distance from print head to right edge of paper cabinet (fixed width): 1.75±1mm
L5 left margin: The default value is 8mm.
L6 width of print area: Set by command (refer to Programming Manual), default value: 64mm
L7 right margin: The default value is 8mm.
2.4.2 Tear-off
position
L1: about 30mm
L2: about 13mm
