SNBC BT-UR056, Руководство программиста, Страница: 6 / 61

Technical Updates SNBC CONFIDENCIAL
Shandong New Beiyang Information Technology Co.,Ltd. Page 5
2.
Command set
HT
[Name] Horizontal tab
[Format] ASCII HT
Hex 09
Decimal 9
[Description] Moves the print position to the next horizontal tab position.
[Notes]
• This command is ignored unless the next horizontal tab position has been set.
• If the next horizontal tab position exceeds the printing area, the printer sets the
printing position to [Printing area width + 1].
• Horizontal tab positions are set with
ESC D
.
• If this command is received when the printing position is at [printing area width
+ 1], the printer executes print buffer-full printing of the current line and horizontal
tab processing from the beginning of the next line.
• The default setting of the horizontal tab position for the paper roll is font 0 (12×24)
every 8th character.
• When the buffers of the line is full, the printer executes as follows:
In standard mode, the printer print the data of current line and set the printing position
at the beginning of next line.
In page mode, the printer shifts newline and sets the printing position at the beginning
of next line.
[Reference]
ESC D
LF
[Name] Print and feed a line.
[Format] ASCII LF
Hex 0A
Decimal 10
[Description] In standard mode, it prints the data in the print buffers and feeds one line based on
the current line spacing.
[Note] This command sets the print position at the beginning of the line.
In page mode, the printer shift newline and set the position at the beginning of Next line.
But it doesn’t execute the print.
[Reference]
ESC 2, ESC 3
FF
[Name] Print and feed paper
[Format] ASCII FF
Hex 0C
Decimal 12
[Description] (1) If the paper is continuous type;
* In page mode print all data in buffers and return to standard mode;
* In standard mode this command is same as
LF
;
* The print area set by
ESC W
is recovered to the default;
(2) If the paper is marked type: