SNBC BT-UR056 Скачать руководство пользователя страница 38

Страница: 38 / 61

Technical Updates SNBC CONFIDENCIAL

Shandong New Beiyang Information Technology Co.,Ltd.

Page 37

/On

off

00 0

Undefined, fixed to 0.

off

00 0

On-line/off-line status enabled.

02 2

On-line/off-line status disabled.

off 00

Error

status

enabled.

on 04

Error

status disabled.

off

00 0

Paper roll status enabled.

Paper roll status disabled.

4-7 -

- -

Undefined.

[Notes]

· If any of the status items in the table above are enabled, the printer transmits

four-byte status of the printer in case that this status is changed.

· If all status items are disabled, the ASB function is also disabled.
· The following status bytes are transmitted without confirming whether the

host is ready to receive data.

· Since this command is executed after the data is processed in the receive

buffer, there may be a time lag between data reception and status
transmission.

· Even though the printer is disabled by

ESC =,

the four-byte status are transmitted

whenever the status changes.
· The status to be transmitted are as follows:

First byte (printer information)

Bit

Off/On

Hex

Decimal

Printer status

Off

Not used. Fixed to 0.

Off

Not used. Fixed to 0.

Not used. Fixed to 1.

Off

On-line.

Off-line.

Not used. Fixed to 1.

Off

Cover is closed.

Cover is open.

Off

Paper is not being fed by using the PAPER
FEED button.

Paper is being fed by using the PAPER FEED
button.

7 Off

Not used. Fixed to 0.

Second byte (printer information)

Bit

Off/On

Hex

Decimal

Printer status

Off

No unfound mark error

Unfound mark error

- -

Undefined.

- -

Undefined.

3 Off

Fixed to 0.

4 Off

Fixed to 0.

Содержание BT-UR056






























































Результаты поиска

Содержание BT-UR056

Отзывы:

SNBC BT-UR056, Руководство программиста, Страница: 38 / 61

Результаты поиска

Содержание BT-UR056

Отзывы: