background image

 

3

IMPORTANT SAFETY INSTRUCTIONS 

 

PREPARATION 

(Continued From Previous Page) 
11.  Protect yourself when mowing and wear appropriate 

clothing including safety glasses, long pants, ear 
protection, hardhat and substantial footwear with 
good traction. Long hair, loose clothing or jewelry 
may get tangled in moving parts. 

12. Know how to STOP blades and engine quickly in 

preparation for emergencies.  

13. Use extra care when loading or unloading the 

machine into a trailer or truck. 

14. Check grass catcher components frequently for 

signs of wear or deterioration and replace as needed 
to prevent injury from thrown objects going through 
weak or worn spots. 

 

SAFE HANDLING OF GASOLINE 

To avoid personal injury or property damage, use 
extreme care in handling gasoline. Gasoline is extremely 
flammable and the vapors are explosive 
1.  Extinguish all cigarettes, cigars, pipes and other 

sources of ignition. 

2.  Use only an approved fuel container. 
3.  DO NOT remove fuel cap or add fuel with the engine 

running. Allow the engine to cool before refueling. 

4.  DO NOT refuel the machine indoors. 
5.  DO NOT store the machine or fuel container inside 

where there is an open flame, spark or pilot light such 
as on a water heater or other appliances. 

6.  DO NOT fill fuel containers inside a vehicle or on a 

truck or trailer bed with a plastic liner. Always place 
the containers on the ground away from the vehicle 
before filling. 

7.  Remove gas-powered equipment from the vehicle or 

trailer and refuel it on the ground.  If this is not 
possible, then refuel equipment using a portable 
container, rather than a gasoline dispenser nozzle. 

8.  DO NOT start gas powered equipment in enclosed 

vehicles or trailers. 

9.  Keep the nozzle in contact with the rim of the fuel 

tank or container opening at all times until fueling is 
complete. DO NOT use a nozzle lock-open device 

10. If fuel is spilled on clothing, change clothing 

immediately. 

11. DO NOT overfill a fuel tank. Replace fuel cap and 

tighten securely. 

 

OPERATION  

1.  DO NOT put hands or feet near or under rotating 

parts. Keep clear of the discharge area while the 
engine is running. 

2.  BEFORE STARTING ENGINE, blades must be OFF 

and Traction Levers LOCKED in the Traction Lock 
position. 

 
 
 

OPERATION  

(Continued From Previous Column) 
3.  Stop Blades when crossing gravel drive, walks, and 

under any conditions where thrown objects might be 
a hazard. 

4.  DO NOT raise deck with the blades running. 
5.  Mow only in daylight or good artificial light. 
6.  USE EXTRA CARE when approaching blind corners, 

shrubs, trees or other objects that may obscure 
vision. 

7.  DO NOT operate the machine while under the 

influence of alcohol or drugs. 

8.  After striking a foreign object or if the mower vibrates 

abnormally, STOP the blades and engine. Remove the 
key. Disconnect and secure the spark plug wire. 
Inspect the mower for any damage and repair the 
damage. 

9.  DO NOT operate machine near drop offs, ditches, 

embankments, washouts culverts, fences and 
protruding objects. STAY ALERT for holes and other 
hidden hazards. Tall grass can hide obstacles. 

10. DO NOT operate machine on wet grass. Always be 

sure of your footing while operating machine, 
especially while backing up. Keep a firm grip on the 
handle. Walk: never run. Slipping and falling could 
cause injury. 

11.  DO NOT leave the machine with the engine running. 

STOP BLADES, STOP ENGINE and REMOVE KEY 
before leaving the operator position for any reason. 
10.  Before cleaning, repairing, or inspecting make 
certain blades, engine and all moving parts have 
STOPPED. Remove key and secure spark plug wire 
away from spark plug key to prevent accidental 
starting. 

12.  STOP MACHINE on level ground, engage parking 

brake (if equipped) and make sure engine and blades 
have stopped before leaving the operator’s position 
for any reason including removing grass catcher or 
unclogging mower to prevent injury to hands or feet. 

13.  Blades must be OFF except when cutting grass. Set 

blades in highest position when mowing over rough 
ground.  

14.  Keep hands and feet away from rotating blades 

underneath deck.  

15.  DO NOT operate machine without entire grass 

catcher or guards in place. DO NOT point discharge 
at people, passing cars, windows or doors.  

16.  Slow down before turning. 
17.  Watch out for traffic when near or crossing roadways.  
18.  Move motion control levers SLOWLY to maintain 

control during speed and directional changes. 

19.  DO NOT operate engine in enclosed areas. Engine 

exhaust gases contain carbon monoxide, a deadly 
poison. 
 

 
 
 

Содержание SGV13321KW

































Отзывы: