4
IMPORTANT SAFETY INSTRUCTIONS
MAINTENANCE
(Continued From Previous Page)
7. Disconnect battery before performing maintenance
or service. Cranking engine could cause injury.
Disconnect negative (black) cable from battery first
and positive (red) cable last. Reconnect positive
first and negative last. Charge battery in an open,
well ventilated area away from spark and flames.
Unplug charger before connecting or
disconnecting from battery. Wear protective
clothing and insulated gloves.
8. Park machine on level ground. DO NOT work under
machine without safety blocks.
9. Service engine and clean, adjust or repair only
when engine and blades are stopped. Remove
spark plug wire(s) from spark plug(s) and secure
wire(s) away from spark plug(s).
10. DO NOT change engine governor speed settings or
overspeed engine. DO NOT make adjustments with
the engine running.
11. Lubricate machine at intervals specified in manual
to prevent controls from binding.
12. Mower blades are sharp and can cut. Wrap the
blades or wear heavy leather gloves and use
CAUTION when handling them. Never straighten or
weld blades, only replace them.
13. DO NOT test for spark by grounding spark plug
next to spark plug hole; spark plug could ignite
gas exiting engine.
14. Carefully release pressure from components with
stored energy.
15.
Have machine serviced by an authorized
SNAPPER dealer at least once a year and have the
dealer install any new safety devices. Never allow
untrained personnel to service machine.
16. Use only genuine SNAPPER replacement parts to
assure that original standards are maintained.
WARNING
Front Weight Kit #6-3180 must be installed before
operating machine with the Clamshell Grass Catcher.
