16
OPERATION
STaRTinG anD STOPPinG ThE Chain Saw
a. To start the chain saw:
•
Make sure chain tension is at desired setting. Refer to adjusting the chain tension in the Care
and Maintenance section of this manual.
•
Make sure the chain cover lock knob is tight to the chain cover.
•
Make sure no objects or obstructions are in the immediate vicinity which could come in contact
with the bar and chain.
•
fit the battery into the chain saw.
•
Press the power button on the left of the rear handle. you will hear two beeps signalling the
chain saw is active.
•
Press in the safety lock. This makes the trigger switch operational.
•
Press and hold the trigger switch and keep it pressed for continued operation.
B. To stop the chain saw:
•
Release the switch trigger to stop the chain saw.
•
Upon release of the trigger switch, the safety lock will be automatically reset to the lock
position.
nOTE:
It is normal for the chain to coast to a stop once the trigger switch is released.
On/Off Button
Switch Trigger
Safety Lock Buttom
Not
for
Reproduction
