11. How to rotate the car seat
12. How to install the top tether
11
12
Vehicles without ISOFIX anchorage systems:
Step 1: Adjust the car seat to the third reclining
position level, then press the rotating button
to rotate the car seat towards rear-facing
direction until you hear a “click” sound.
Press the rotating button to rotate the car seat for easier side loading/unloading
of the child, then rotate back to desired direction until you hear a “click” sound.
Notice
:
Do not drive unless car seat is front or real-facing direction. The car seat
must be properly secured.
Step 1: Pull out the top tether and press
the release button on the top tether
system to lengthen the belt.
Step 2: Pass the top tether through the
slot between the headrest and
backrest. Fix the hook of the top tether
on the vehicle seat’s top tether anchor
according to the vehicle usage
manual.
Tighten the top tether until the
indicator shows green.
13. How to install car seat rear-facing for Group
0+ (0-13kg, approx. birth to 1 year)
Notice:
1. Do not install this car seat in a forward
facing position if your child weighs less than
9kg. Adjust the car seat to the most reclining
position level (please refer to section 9).
Shake the car seat before use to make sure it
has been installed securely.
2. Ensure the harness is not twisted.
