Forward facing - First level
Forward facing - Third level
Rear facing - Most recline
Forward facing - Second level
10
9
8. How to adjust the shoulder belts
Important: Make sure both
shoulder belts are of the same
height, not twisted, and fitted
properly into the yoke connect
plate.
9. How to adjust the reclining position of the car seat
10. How to adjust the height of the headrest
If the height of the shoulder belt is not suitable for your child, adjust according to the
following steps:
Step 1: From the back of the car seat, remove both shoulder belts from the yoke
connect plate.
Step 2: Release the shoulder pad from shoulder pad connecting plate, pull both
shoulder belts and shoulder pads out from the shoulder belt route slot.
Step 3: Insert the shoulder belts and shoulder pads into the appropriate shoulder belt
route slot. Fit the shoulder belts into the yoke connect plate and fit the shoulder pads
into the shoulder pad connecting plate.
Pull the reclining adjustment lever and adjust the car seat to the most suitable
position. Release the reclining adjustment lever and you should hear a “click” sound.
For forward facing installation, this car seat can be adjusted to three reclining
positions. For rear-facing installation, please adjust the car seat to the third level, then
press the rotating button to rotate the car seat towards rear-facing direction.
To raise headrest
Pull both headrest and height adjuster upwards to an
appropriate position until you hear a “click” sound.
To lower headrest
While pulling the height adjuster upwards, push the
headrest downwards to an appropriate position until you
hear a “click” sound.
Step 1
Step 2
