If you are using Windows 2000, click
Start
,
Settings
,
Network and Dial-up
Connections
, right-click
Local Area Connection
, click
Properties
, select
Internet
Protocol
and then click
Properties
to display the following screen:
Figure 2.3 TCP/IP properties
You can also manually configure the PCs on your network. For each non-configured
Windows 2000 PC on the network, open
TCP/IP Properties
using the above instructions
and ensure that
Use the following IP address
is checked and add the following
information:
•
A unique IP address and appropriate subnet mask.
•
The Default Gateway (enter the IP address of the SnapGear appliance).
•
In the
DNS
tab, enter the DNS server address(es) provided by your ISP, or the
address of the SnapGear appliance if you are using the DNS proxy.
Getting started
29
Содержание VPN appliance Family 1.7.8
Страница 11: ...Figure 1 3 Network interconnections Introduction 8...
Страница 70: ...Firewall 67 Figure 6 7 Content filtering...
