14
Dome Setup Menu
To access these commands, Press and hold
Set
to enter the main menu,
then select
2. Dome setup
. These menu items allow you to set and view the
parameters of the various cameras attached to the system.
IMPORTANT:
This section of the manual is written to the specifications of the
WPS-500-PTZ-A and the WPS-750-PTZ-A camera models. Different systems from
varuious manufacturers may have different operating methods, or particular
requirements and settings. Use this section of the manual in combination of with
the user’s manual for your cameras and matrix.
Set Dome Preset Menu
Presets are predefined static views for a camera (e.g., aiming at the cash
register at high zoom, or a wide-angle view of the side door). The camera does
not move when on a preset. Most PTZ cameras can have up to 128 presets.
Create and Save a Preset View
First manipulate the camera until it shows the view you want ot save. Then, from
the Dome Setup menu, choose:
1. Set dome preset
1. Save preset
Enter the preset number using the numeric keypad, then press
Ent,
and the
preset will be saved to the camera, overwriting any preset that was already
under that name.
Show a Preset View
From the Dome Setup menu, choose:
1. Set dome preset
2. Show preset
Enter the preset number, then press
Ent,
and the camera will move to display
that saved preset. If there is no such preset, the camera will not move.
Clear a Preset View
From the Dome Setup menu, choose:
1. Set dome preset
3. Clear preset
Enter the preset number of the preset you want cleared, then press
Ent
. Be sure
it’s the one you want; there is no undo!
Содержание WPS-ACC-PTZ-CTRL
Страница 7: ...7...
