SNAP Networks Private Limited.
Violet3D 5.1 System Learning Set Up
Set up for Speaker, Transmitter and MIC:
1.
Power on the transmitter. If it is in standby mode switch on using
remote control.
2.
Make sure that the microphone is connected properly with the
transmitter by observing the mute LED blinking orange.
3.
Microphone placement precautions.
a.
Place microphone close to listening position.
b.
Wing 1 (Red) should point to the front (to TV) of the room.
c.
Wing 1(Red), Wing 2(Green) & Wing 3(Yellow) should be inserted
respectively in anti-clockwise direction as shown in the figure.
Red
Green Yellow
4.
Height should be around
4 ft
.Place both PVC tubes with base on the
floor or one PVC tube with base on the sofa/couch or a table.
5.
All 5 speakers should be in line of sight with the microphone.
6.
If the speaker is wall mounted/ceiling mounted, height of speaker
should be maintained
7 to 9 ft
from the floor with down firing.
TV
