222
Section 19
Maintenance
Introduction
This section describes typical maintenance and care procedures for your diagnostic
tool and components.
Main Topic Links
•
•
•
Cleaning the Compact Scan Module (CSM)
•
•
•
•
Stylus Tip Replacement (Touch Screen)
19.1 Cleaning
19.1.1 Cleaning the Diagnostic Tool
Periodically perform the following tasks to keep your diagnostic tool in proper
working order:
•
Check the housing, cables and connectors for dirt and damage before and after
each use.
•
At the end of each work day, wipe the diagnostic tool housing, cables and
connectors clean with a damp cloth.
IMPORTANT
Do not use any abrasive cleansers or automotive chemicals on the
diagnostic tool.
19.1.2 Cleaning the Touch Screen
The touch screen can be cleaned with a soft cloth and a mild window cleaner.
IMPORTANT
Do not use any abrasive cleansers or automotive chemicals on the touch
screen.
19.1.3 Cleaning the Compact Scan Module (CSM)
When using the CSM, always:
•
Check the housing, wiring, and connectors for dirt and damage before and after
each use.
•
At the end of each work day, wipe the housing, wiring, and connectors clean
with a slightly damp cloth.
Содержание Zeus
Страница 1: ...User Manual ZEEMS342A Rev F TM Start BC ...
