- 36 -
4: COMMUNICATION PROBLEMS / STATUS
When the Scanner is unable to establish communication with the ECU in the
vehicle under test, or when the communication is interrupted, a message will be
displayed.
Wait to see whether the communication is established again or interrupted.
Press
N
to abort.
In this case the communication status is displayed on the screen:
•
BEN = engine number in the software, Code1-7 and Baud rate of the
communication between Scanner and the ECU.
Switching off-and-on the ignition and a re-enter the ID may reset this. If not
successful in reestablishing communication, send the communication status
information to Sun Electric, for further investigation of communication problems.
*******
TROUBLESHOOTING
ScannerA5.p65
20/01/00, 10:00
36
Содержание MT-2500
Страница 1: ...Scanner P N 0692E9315 76 Rev C PCN 02E0093 OPERATOR S MANUAL ...
Страница 42: ... 38 ...