Snap-On EEWH326A Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 28

background image

Page 3

Operation Manual

SAFETY INFORMATION

For your safety, read this manual thoroughly

before operating the EEWH326A Air-Electric Tire Changer

The EEWH326A Air-Electric Tire Changer

is intended for use by properly trained

automotive technicians. The safety messages presented in this section and throughout
the manual are reminders to the operator to exercise extreme care when changing tires
with these products.

There are many variations in procedures, techniques, tools, and parts for changing
tires, as well as the skill of the individual doing the work. Because of the vast number of
wheel and tire applications and potential uses of the product, the manufacturer cannot
possibly anticipate or provide advice or safety messages to cover every situation. It is
the automotive technician’s responsibility to be knowledgeable of the wheels and tires
being changed. It is essential to use proper service methods and change tires in an
appropriate and acceptable manner that does not endanger your safety, the safety of
others in the work area or the equipment or vehicle being serviced.

It is assumed that, prior to using the EEWH326A Air-Electric Tire Changer, the

operator

has a thorough understanding of the wheels and tires being changed. In addition, it is
assumed he has a thorough knowledge of the operation and safety features of the rack,
lift, or fl oor jack being utilized, and has the proper hand and power tools necessary to
service the vehicle in a safe manner.

Before using the EEWH326A Air-Electric Tire Changer, always refer to and follow
the safety messages and service procedures provided by the manufacturers of the
equipment being used and the vehicle being serviced.

IMPORTANT !!

SAVE THESE INSTRUCTIONS - DO NOT DISCARD !!

EEWH326A Air-Electric Tire Changer

«
1
2
3
4
5
...
»

Содержание EEWH326A





























Отзывы:

Нет отзывов

Похожие инструкции для EEWH326A

Бренд: Neilsen Страницы: 8

Бренд: TECO Страницы: 330

Бренд: TECO Страницы: 301

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды