background image

 WARRANTY/SERVICE AND REPAIR 

Snap-on® Tools Limited Two (2) Year Warranty

Snap-on Tools Company (the “Seller”) warrants only to original purchasers who use the Equipment in their business 
that under normal use, care and service, the Equipment (except as otherwise provided herein) shall be free from 
defects in material and workmanship for two years from the date of original invoice. Seller does not provide any 
warranty for accessories used with the Equipment that are not manufactured by Seller.

SELLER’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE REPAIR OR, AT SELL-
ER’S OPTION, REPLACEMENT OF EQUIPMENT OR PARTS WHICH TO SELLER’S SATISFACTION ARE DE-
TERMINED TO BE DEFECTIVE AND WHICH ARE NECESSARY, IN SELLER’S JUDGMENT, TO RETURN THIS 
EQUIPMENT TO GOOD OPERATING CONDITION. NO OTHER WARRANTIES, EXPRESS OR IMPLIED OR 
STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FIT-
NESS FOR A PARTICULAR PURPOSE, SHALL APPLY AND ALL SUCH WARRANTIES ARE HEREBY EXPRESS-
LY DISCLAIMED.

SELLER SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL COSTS OR DAM-
AGES INCURRED BY PURCHASERS OR OTHERS (including, without limitations, lost profi ts, revenues, and an-
ticipated sales, business opportunities or goodwill, or interruption of business and any other injury or damage).

This warranty does not cover (and separate charges for parts, labor and related expenses shall apply to) any dam-
age to, malfunctioning, inoperability or improper operation of the Equipment caused by, resulting from or attributable 
to (A) abuse, misuse or tampering; (B) alteration, modifi cation or adjustment of the Equipment by other than Seller’s 
authorized representatives; (e) installation, repair or maintenance (other than specifi ed operator maintenance) of 
the Equipment or related equipment, attachments, peripherals or optional features by other than Seller’s authorized 
representatives; (D) improper or negligent use, application, operation, care, cleaning, storage or handling; (E) fi re, 
water, wind, lightning or other natural causes; (F) adverse environmental conditions, including, without limitation, 
excessive heat, moisture, corrosive elements, dust or other air contaminants, radio frequency interference, electric 
power failure, power line voltages beyond those specifi ed for the Equipment, unusual physical, electrical or electro-
magnetic stress and/or any other condition outside of Seller’s environmental specifi cations; (G) use of the Equip-
ment in combination or connection with other equipment, attachments, supplies or consumables not manufactured 
or supplied by Seller; or (H) failure to comply with any applicable federal, state or local regulation, requirement or 
specifi cation governing welders and related supplies or consumables.

Repairs or replacements qualifying under this Warranty will be performed on regular business days during Seller’s 
normal working hours within a reasonable time following purchaser’s request. All requests for Warranty service 
must be made during the stated Warranty period. Proof of purchase date is required to make a Warranty request. 
This Warranty is nontransferable.

Notice

:  The information contained in this document is subject to change without notice. 

Snap-on

 makes no warranty 

with regard to this material. 

Snap-on

 shall not be liable for errors contained herein or for incidental consequential 

damages in connection with furnishings, performance, or use of this material.

This document contains proprietary information which is protected by copyright and patents. All rights are reserved. 
No part of this document may be photocopied, reproduced, or translated without prior written consent of 

Snap-on.

 

        

        

Snap-on Equipment, 309 Exchange Ave. Conway,  Arkansas 72032

Customer Service and Technical Support Line 800-225-5786

Assembled in USA. Snap-on and Wrench “S” are trademarks of Snap-on Incorporated.

©Snap-on Incorporated 2013. All Rights Reserved.

Printed in United States. Snap-on, 2801 80th St., Kenosha, WI 53143   www.snapon.com

Form ZEEWH326A3 REV F..  10.29.2014..  wdc 

All Rights Reserved

Содержание EEWH326A





























Отзывы: