Snap-on Cloud
Registration - Getting Started
81
Figure 12-1
NOTE
The PIN and Code numbers will change each time you view the Setup screen
This is normal, any displayed set of PIN and Code numbers may
be used to register.
3.
Using a mobile device or PC, visit
https://ALTUSDRIVE.com
and select
Create Individual Account
from the Login screen.
4.
Enter the required information and create a
Username
and
Password,
then
select
Create
.
5.
At the “Success” confirmation screen, select
Done
.
6.
Log in using your
Username
and
Password
.
7.
Answer the security questions, then select
Submit
.
8.
From Technician Profile Manager select the
Device Management
tab.
9.
Select
Add Device
, then enter your
Serial Number
,
PIN
,
Code
, and Device
Name and select Save when done.
10.
Log out of Profile Manager, then select the
ALTUS Home Page
browser tab to
get started.
11.
Turn the diagnostic tool off, and then on.
12.
.
Your Diagnostic diagnostic tool is now registered to your account. Code scan reports
will be automatically sent (only when connected to Wi-Fi) to your online account from
the device.
NOTE
If the device is not connected to a Wi-Fi network when the code scan is
performed, the report will not be sent to your account. Wi-Fi connection is
required to upload the report.
12.3.2 Snap-on Cloud Setup Information Screen
From the Home screen, selecting
Tools > Get Connected
allows you view
) the diagnostic tool serial number, PIN and Code needed to register.
NOTE
The PIN and Code numbers will change each time you view the Setup screen
(
).
This is normal, any displayed set of PIN and Code numbers may
be used to register.
Figure 12-2