Basic Operation and Navigation
Basic Navigation
8
3.3.4 Common Toolbar Control Icons
Common control icon functions are described in the following table. Specific
function control icons are described in their applicable sections. Displayed control
icons vary depending on the active function or test.
Select a control icon to perform a function. You can also use the control buttons to
select an icon. Use the directional button to highlight the desired function and then
press the
Y/Accept
button to select it.
3.3.5 Scroll Bar
A vertical scroll bar appears along the right-hand edge of the screen when
additional data expands above or below what is currently on the screen
(
).
Figure 3-3
Scroll bar
1— Beginning
- Moves to beginning of data displayed.
2— Step up -
Moves up one increment of the data displayed.
3— Slider (position indicator) -
Select and drag the
Slider
to scroll through
data. The slider indicates the relative position of the current screen to the
total available data.
4— Step down -
Moves down one increment of the data displayed.
5— End -
Moves to end of data displayed.
The Up and Down directional buttons can also be used to move through the data
one line at a time. Press and hold a directional button to rapidly scroll through data.
Icon
Function
Icon
Function
Back
- Returns to the
previously viewed screen.
Icon is located on the left-
hand edge of the toolbar.
Pause
- Indicates PID
data from the vehicle is
being displayed.
Selecting pauses data
collection.
Home
- Returns to the Home
screen. Icon is located next
to the Back icon on the left
side of the toolbar.
Record
- Indicates the
data being displayed is
paused and not being
updated. Selecting
resumes data collection.
Save
- Writes data from
buffer memory to a file. The
saved “movie” file can be
accessed for future
reference by selecting
Previous Vehicles and Data
> View Saved Data
.
Tools
- Opens the tools
menu.
The icons below are used to navigate through paused or saved data (“movie”)
files during review.
Step Forward
- allows
forward movement in
singular steps.
(
Note: To quickly step
forward during Scanner data
review, press and hold the
icon down.
)
Step Back
- allows
backward movement in
singular steps.
(
Note: To quickly step
backward during
Scanner data review,
press and hold the icon
down
.)
Skip Forward
- allows
forward movement in
multiple steps.
Skip Back
- allows
backward movement in
multiple steps.