background image

SYMPTOMS OF CARBON MONOXIDE POISONING

Carbon monoxide (CO) is a colorless, odorless, tasteless, extremely toxic gas that

can 

KILL

in a matter of minutes. Breathing air containing carbon monoxide 

produces symptoms of headache, dizziness, loss of muscular control, a sleepy 

feeling and finally coma. Moderate or severe brain damage can result from inhaling

air containing carbon monoxide. Carbon monoxide is a product of incomplete 

combustion of fuels and occurs in exhaust fumes of fuel-burning heaters and all

internal combustion engines. Carbon Monoxide collects in spaces where there is no

constant air flow or ventilation. 

If you start to feel sick, dizzy or weak due to 

exposure to CO while using gasoline engine, GET TO FRESH AIR IMMEDIATELY

.

ADDING OR DRAINING FUEL TO OR FROM THE ENGINE

Fuel and fuel vapors are extremely flammable and 

explosive. Fire and explosion can result in severe burns

and even death.

• Turn engine to the 

OFF

position and let cool at least two minutes before 

removing fuel cap. Loosen cap slowly to relieve pressure in fuel tank.

DO NOT

fill or drain fuel tank inside enclosed structures. Accidental sparks 

can result in fires or explosions leading to severe burns and even death.

DO NOT

overfill fuel tank. Leave ample space for expansion of fuel.

DO NOT

start engine in area of fuel spillage. Fire and explosion can occur.

• Keep fuel away from sparks, open flames, pilot lights, heat and other ignition 

sources. 

DO NOT

smoke while operating the engine.

DO NOT

tip engine or equipment at angle that could result in fuel spilling 

from fuel tank.

STARTING THE ENGINE

Starter cord kickback (rapid retraction) can

pull your hand and arm toward the engine faster than it can be let

go of. Failure to be aware of this function can result in broken

bones, fractures, bruises and sprains can result.

• When starting the engine, pull cord slowly until resistance is felt, then pull 

rapidly to avoid kickback.

Keep protective guards in place and in proper working condition.

Maintain tools and equipment with care.

They will function better and more

safely when kept clean and in good working condition. Keeping the tool clean,

dry, and free of grime will add to its life and performance.

Do not use the tool for applications other than specified

.

SAFETY RULES FOR GASOLINE ENGINES

Carbon monoxide is a product of incomplete combustion, such as

exhaust from the engine. Carbon monoxide is colorless, odorless

and tasteless and can kill in a matter of minutes.

Gas particulate filters and respirators will not protect someone from carbon

monoxide poisoning. If symptoms of carbon monoxide poisoning appear,

take the affected person outdoors immediately and away from all structures

and equipment that could produce the gas. Call for emergency medical treat-

ment and make them aware of the situation.

Operate pressure washer only outdoors. Do not allow exhaust gas fumes

from entering confined areas through windows, open doors, ventilation ducts

and other openings. 

Do not start or run engine indoors or an enclosed area, such as a garage

(even if windows and doors are open). This also applies to the engine com-

partment of a recreational vehicle (RV).

The engine exhaust from this product contains chemicals known to the State

of California to cause cancer, birth defects or other reproductive harm.

Install a battery powered Carbon Monoxide (CO) detector near all bedrooms to

alert occupants of dangerous levels of carbon monoxide. Carbon monoxide is a

colorless, odorless, very poisonous gas.

The Emission Control System for engine is warranted for standards set forth by

the EPA/Environmental Protection Agency and CARB/California Air Resources

Board.

7

8

Содержание 870591






















Отзывы: