SNAIGE SN-4237HP, Руководство пользователя

Страница: 10 / 29

10
This is caused by the isolation material and will stop soon.
Connect the appliance to the power contact. Leave the hot places to operate on
position 3 without any utensils on them for about 3 minutes. In this way the protective
greasing layer will be burned out, which will have as a result a longer life cycle of the
hot plates.
After finishing the operation of the hot plates turn the switch back to position 0.
After finishing the operation of the oven turn the thermostat back to position 0.
Operation of the minicooker and the minioven
Operation of the hot plates
– only for model SN-4237HP
The appliance is equipped wit 2 hot plates. 1500 W hot plate (diameter 180
mm) и
1000 W hot plate (diameter 145 mm). Each hot plate is controlled by 4-position
rotating switch. By th switch each hot plate can be turned on (the indicator light is
turned on) or turned off. The use of the 4-position switch is easy: the heating of the hot
plat corresponds to the position of the switch
0 1 2 3
Switch turned off Keeping of the
food hot
Warming up
of the the
foood
Cooking
No light Indication light turned on hot plate
Each hot plate can operate for long only when the oven does not operate. When the
oven is turned on the hot plates are turned off automatically, even when the indicator
lamp of the hot plate is turned on. The hot plate will start to operate again only when the
oven reaches the set temperature or switches off.
Operation of the oven
The oven can be used in the following way:
- upper + lower resistance together;
- only upper resistance,
- only lower resistance,
- grill
– only for model SNO-7058
You can choose the mode for using of the oven through the key on the control panel.
So you can operate the oven, choose a position of the key and turn the timer and the
thermostate up to the wished temperature:
Thermostat 0 - the oven is turned off
Thermostat 40 - 23
0° C – the oven operates at the choosen temperature (the indicator
lamp is turned on).
Warm up for about 5 minutes before putting food, so condense on the glasses of the
oven can not be formed.
Turn the thermostate back to position 0 when the cooking is finished.
Timer: Set the timer to the recommended cooking time
at the desired thermostat degree. When the set time has expired, timer shall
cut off the power of the heaters and provide a warning with a tingling sound.