12
1.
Remove the four covers C from the housing and inside of the door.
2.
Unscrew the hinge bolt on the inside of the door in thearea C/6. Caution: Support
the door.
3.
Take off the refrigerator door.
4.
Take out the fi xing screws and remove the upper bracket 6. Note the small plastic
plate underneath the bracket.
5.
Turn the bracket 6 including the small plastic plate through 180° and replace it on the
other side of the refrigerator, using the two screw holes adjacent to each other.
6.
Place the refrigerator door on a soft surface. Remove the hinge support 5 from the
underside of the door and fit the hinge support provided on the opposite side.
7.
Take out the covering caps and then remove the hinge support in the middle 4. Note
the small plastic plate underneath the bracket. Caution: Support the door.
8.
Take off the freezer door 3.
9.
Unscrew the legs 7 from the cabinet.
10.
Unscrew the lower bracket 2 together with the washers on the shaft. Unscrew the
shaft counterclockwise. Turn the bracket 2 At an angle of 180 °, screw the shaft into
the bracket on the other side and place the washers on the shaft.
11.
Attach the bracket 2 on the opposite side of the cabinet. Screw the legs 7 into the
cabinet.
12.
Take out the sealing plugs 8 from the partition separating the refrigeration and freezer
compartments and replace them in the openings on the opposite side.
13.
Take out sealing plugs 9 from the freezer door and replace it in the opening on the
opposite side.
14.
Place the freezer door onto the hinge bolt on holding bracket 2. Caution: Support
the door.
15.
Turn the holding bracket 4 with its hinge bolt and plastic plate through 180°.
16.
Replace the bracket bolt on the opposite side of the freezer door and secure it with the
screws.
17.
Replace the covering caps over the screw heads. Place the refrigerator door onto the
hinge bolt on holding bracket 4. Caution: Support the door.
18.
Re-insert the hinge bolt of the bracket 6 into the refrigerator door and secure it with
the screws.
19.
Fit the four covers C over the bracket and the openings.
Wait for about 30 minutes before it is connected to the mains. If the unit has been tilted
to more than 30°, wait for about 4 hours before re-connecting it to the mains
.
OPERATION PROBLEMS AND THEIR SOLUTIONS
•
The appliance is plugged in to the mains but it does not work. Check that your
house electricity supply installations are in order. Check that the plug is correctly
inserted into the electricity supply socket.
•
Temperature segment in centre of button is red. Cooling device is operating in
emergency mode. Contact the refrigeration appliance’s maintenance and repair company
without delay.
•
Temperature cannot be set, FAST FREEZE function cannot be activated. Close
the refrigerator door, turn off the cooling device – disconnect the power supply cord
from the outlet, and wait 12 minutes. After the specified time, plug the power cord back
