1
S A F E T Y I N S T R U C T I O N S
CAREFULLY READ THE INSTRUCTION MANUAL! If instructions are not followed, there
is a risk of injury, damage of the appliance and loss of the right to free warranty
service.
We recommend to keep the Instruction manual the whole time you have the appliance.
When you sell the appliance pass the Instruction manual to the new owner of the appliance.
W A R N I N G !
–
Do not cover the ventilation holes at the top and on the sides of the appliance.
–
Do not use any mechanical means or electrical devices to hasten the thawing
process when cleaning the freezer compartment.
–
Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
–
If the supply cord is damaged it must be replaced by the manufacturer,
manufacturer service agent or a similarly qualified person, in order to avoid a
hazard.
–
Disposal of the appliance should be according to national rules.
–
Do not damage the appliance refrigeration system.
It contains the refrigerant gas
R600a. If the refrigeration system is damaged:
Do not use any open flame.
Avoid sparks ― do not turn on any electrical appliances or lighting fixtures.
Immediately ventilate the room.
–
Do not allow children to play with the appliance or to plug it in or unplug from the
electricity supply socket. Do not allow children to play with the packaging material
from the appliance.
–
The appliance should not be used by children or mentally challenged individuals,
unless they have previously been shown how to operate the appliance by someone
responsible for their safety.
If the appliance is brought in from the cold (temperature is not higher than +12 °C), you should
wait for two hours before connecting it to the mains.
The appliance should not be connected to the mains until all packing and transport materials
aren’t removed.
Once the appliance is unpacked, make sure that it is complete, that the body and the electrical
cord aren’t damaged.
It is forbidden to use a technically damaged appliance.
C O N N E C T I O N T O T H E M A I N S
–
The appliance must be plugged into an earthed electricity supply socket. The
earthed electrical socket by which the appliance is connected to the mains should
be in an accessible place.
–
IF THE APPLIANCE IS PRODUCED WITH THE SPECIAL SUPPLY CORD IT CAN BE EXCHANGED
ONLY BY THE SAME SPECIAL SUPPLY CORD PROVIDED BY THE MANUFACTURER.
–
TO AVOID HAZARDS, DAMAGED POWER SUPPLY CORDS SHOULD BE REPLACED ONLY BY THE
MANUFACTURER, A MAINTENANCE TECHNICIAN, OR A PERSON WITH AN EQUIVALENT
QUALIFICATION.
–
DO NOT USE extension cords or connectors (adapters) or couplers.
Содержание RF31SM
Страница 1: ......
