SNAIGE F 27FG, Инструкция по эксплуатации

Страница: 11 / 13

10
3. Unscrew the shaft 2 from the lower bracket 7. Screw it together with all the washers
into the bracket 7 on the other (opposite) side, symmetrically to the former position
(see figure). Slide the door onto the 7 axles of the bracket.
4. Rotate the bracket 6 with the washers on the shaft and the plastic gasket at an angle of
1800, unscrew the shaft together with the washers and screw in on the opposite side
of the bracket. After inserting the bracket 6, screw it into the refrigerator compartment
door on the opposite side of the refrigerator in the upper holes.
5. Cover the bracket and the remaining empty cavity with lids c.
6. Remove the screw caps a and the blinds b. Unscrew the screws securing the handles.
Move the handles in the opposite direction and tighten. Press the blinds into the
remaining holes in the door and place the covers on the screws.
7. Remove the cover 10 from the lower cover 1 and insert it into the guides on the other
side of the lower cover (symmetrical to the previous position). Insert the left and right
legs of the lower cover 1 into the holes (see figure) and slide until the cover locks in
place.
Wait for about 30 minutes before it is connected to the mains. If the unit has been tilted
to more than 30°, wait for about 4 hours before re-connecting it to the mains
.