CHANGING THE OPENING DIRECTION OF THE DOORS
It is recommended that changing the opening direction of the doors should be done
with a helper. When changing the opening direction of the doors YOU CAN NOT lay the
refrigerator horizontally!
Do the actions below in the order they are listed:
1.
Turn off the appliance and pull the plug out of the electricity supply socket.
2.
Remove the two screws (
8
) and separate the bottom bracket (
10
) together with the
washers and gaskets (
9
) on the small axle.
3.
Remove the two screws (
7
)
and separate the bracket (
5
) and the gasket (
6
).
4.
Separate the door (
4
).
5.
Remove the 4 screws (
1)
at the top of the advertising panel, separate the top of the
advertising panel (
11
), remove the front part of the advertising panel (
12
), and
then remove 4 screws (
13)
and separate the advertising panel; then loosen the 2
screws (
14)
and transfer the upper bracket (
15
) to the other side. Assemble the
advertising panel in reverse order.
6.
Turn the door 180°, insert the upper axle and mount the door on it.
