13
ONLY A SERVICE REPRESENTATIVE CAN REMOVE ANY TECHNICAL
OR CONSTRUCTION DAMAGE
.
Requirements for safe use:
−
The plug must be removed from the mains socket every time the refrigerator is
serviced.
Do not pull on the power cord
to switch off the appliance. Always
pull firmly by the power plug.
−
Do not pull on the power cord
to switch off the appliance. Always pull firmly
by the power plug.
−
It is forbidden to use a technically damaged refrigeration appliance.
−
The appliance must not be incinerated.
−
Do not use steam or water spray to clean the appliance, do not place it in a
damp room where water can easily get on it.
Transport the refrigerator in an upright position
. The manufacturer
is not liable for any damage to the device if the transport conditions are not
observed.
THE MANUFACTURER GUARANTEES THE RELIABLE OPERATION OF THE
REFRIGERATOR AT AMBIENT TEMPERATURES FROM +16 TO +40 DEGREES AND
RELATIVE HUMIDITY OF NOT MORE THAN 40 PERCENT.
POSITIONING AND PREPARATION FOR WORK
Positioning:
•
Install the appliance in a dry, well-ventilated place where the ambient temperature
corresponds to the climate class indicated on the appliance data plate.
Do not operate the refrigerator in an unheated room. Place the appliance away from
heat sources: stove, radiator, direct sunlight. The
refrigeration appliance must not come into contact with
heating, gas, water supply or nearby electrical
appliances.
•
Do not cover the ventilation opening at the top of the product
- there must be good air circulation around the appliance.
•
The appliance must stand on a flat surface. If necessary,
adjust the height of the appliance by turning the legs.
•
If you place the appliance to the corner, leave a distance of at
least 5 cm between the wall and the housing of the appliance.
Diagram of the area required for use.
►
Preparation for work:
•
To prevent injuries and damage to property, the appliance
can be installed by at least two people.
