SMW Autoblok 208109, Инструкция по эксплуатации

Страница: 12 / 28

12 SMW-AUTOBLOK
1 0x00
2 0x01
3 0x02 0x17
4 0x03 0x21
5 0x04 0x11
6 0x05 0x50
7 0x06 0x00
8 0x07 0x04
9 0x08 0x46
10 0x09 0x03
11 0x0A 0x2C
12 0x0B 0xEC 0-10V
0XEB 4-2mA
13 0x0C 0x00
14 0x0D 0x00
IO-Link Process Data Structure and Parameters
Configuration
BD1 switchpoint logic Index 0x3D Subindex 1
0 (High-Active) 1 (Low-Active)
BD1 - switching signal 1:
Target outside of the limits
0 1
Target within the limits 1 0
BD2 switchpoint logic Index 0x3F Subindex 1
0 (High-Active) 1 (Low-Active)
BD2 - switching signal 2:
Target outside of the limits
0 1
Target within the limits 1 0
IO-Link Communication and ID Parameters
Direct Paramter Page 1 - Index 0x00
Sub Address
hex Name Type Data
type Attribute Value Comment
Communication Control
Master Command R/W uint8 volatile written by master
Master cycle time R/W uint8 volatile written by master
Min. cycle time R uint8 constant 2.3 ms
M-sequence capability R uint8 constant ISDU support
Revision ID R uint8 constant IO-Link version 1.1
Process Data in R uint8 constant 16bit Pdin, SIO support
Process Data out R uint8 constant n/a
Identification Parameter
IO-Link Vendor ID1 (MSB) R uint8 constant SMW Autoblok
IO-Link Vendor ID2 (LSB) R uint8 constant
Device ID1 (MSB) R uint8 constant LPS 4.0 120 IO
208108 0-10V
208107 4-20mA
Device ID2 R uint8 constant
Device ID3 (LSB) R uint8 constant
Function ID1 (MSB) R/W uint8 static not used
Function ID2 (LSB) R/W uint8 static
BD3 switchpoint logic Index 0x400
0 (High-Active 1 (Low-Active)
BD3 - switching signal 3:
Target outside of the limits
0 1
Target within the limits 1 0