SMSEagle SMSEagle, Руководство пользователя

Страница: 7 / 27

Page
7
Step 4: Configure IP settings
Follow the steps below in order to the device first time using Ethernet – with initial factory
settings on the device.
SMSEAGLE
DEFAULT NETWORK CONFIGURATION
The following configuration is set on a device by default:
IP address: 192.168.0.101
Subnet Mask: 255.255.255.0
DHCP client: ON
a) C
ONNECT TO A
PC
The computer (PC) must be in the same network subnet as the device. Taking into account
the factory settings of the device (listed above), a computer must have following IP
configuration:
IP address: 192.168.0.X
Subnet Mask: 255.255.255.0
where X is any value between 1-244 excluding 101
Examples of valid IP addresses are: 192.168.0.1 and 192.168.0.102
The current tutorial assumes you have factory settings on the device. If you do not know what
current network settings are you can restore device to the factory settings (see the
Troubleshooting chapter).