SMSEagle NXS-9700-3G, Руководство пользователя

Страница: 80 / 229

80
| SMSEagle NXS-9700 | User’s Manual
CONNECTING AN EXTERNAL TEMPERATURE SENSOR
External probes with temperature sensors for SMSEagle NXS-97xx Rev.3 (and higher) devices can be
purchased in our
online store or via Sales Partner network . The purpose of the probes is to facilitate
temperature measurement and SMS alerting via "Temp & humidity" menu in SMSEagel Web-GUI.
The external sensor connects to the device via block connector as follows:
•
Red wire to (5V)
•
Yellow wire to (1W)
•
Black wire to (GND)
Multiple sensors are supported and can be attached in parallel.
Once attached to the device you need to “Scan for sensors” in Temp & Sensors > Settings menu
LDAP plugin
The LDAP plugin allows to access Active Directory (hereinafter referred to as “AD”) and read contacts and
groups in SMSEagle web-GUI. The plugin can work with either Active Directory or OpenLDAP protocol type.
PLUGIN CONFIGURATION
Choose “LDAP” from left side menu in SMSEagle web-GUI to access plugin configuration. After enabling the
plugin, user needs to fill in all requested fields according to AD settings.
In the “AD phone attribute” field user needs to choose which phone attribute from AD will be shown in
SMSEagle web-gui.