SMS TORK REA 60, Инструкция по установке и эксплуатации

Страница: 12 / 25

Limit Switch Setting

Rotate the actuator hand wheel manually to closed position

Using hex wrench, loosen the set screw on the CLOSE limit switch cam

Rotate the CLOSE cam towards CW limit switch lever until the switch “clicks” Tighten the set screw with
hex wrench

Rotate the actuator hand wheel manually to open position

Using hex wrench, loosen the set screw in the “open” limit switch cam

Rotate to “open” cam towards CCW limit switch lever until the switch “clicks” (fig 2)

Tighten set screw with hex wrench
Danger: HAZARDOUS VOLTAGE (Make sure all power is disconnected prior to mounting)