SMS ControlMate, Руководство пользователя

Страница: 37 / 56

SMS ControlMate/3G © 2016-2018 info@SL4P.net Page 37 of 56
GLOSSARY OF TERMS
PULSE
Outputs may be set for on/off operation, or to activate for a specific PULSE duration.
Default is latched on/off operation.
Pulsed output
ON events are always notified to the CLI sender and OUTSMS users.
Pulse OFF events are only ever notified if the pulse duration is 30 secs or longer, and only
when tagged in the OUTSMS settings.
When a CLI user sends an ON command to a
pulsed output, the pulse OFF notification will
not be reflected to the sender – because the OFF event is generated by the pulse duration,
not the sending user.
FLASH
Outputs may be set for repeated flashing as long as the output is ‘on’ – whether as a static
‘on’ state or as a pulsed ‘on’ duration. Fl ashing only occurs during the ‘on’ state of the
output, and does not increment OUTCOunter.
CAUTION : If the flash rate is shorter than 100mS, all time-of day events will not be updated
while the flash sequence is active. This includes timer events!
TIMER
Timers may be configured to perform any controller function on specified days of the week.
N/O or N/C
INVERTED / NON-INVERTED operation
Input contacts may be assigned to be asserted either
when they are ‘open’ (Normally OPEN) or ‘closed’ (Normally CLOSE D)
DELAY
After an input pin state is changed, this is the period before the ControlMate logic executes
the desired action. Default immediate
ONCMD / OFFCMD
For unattended operation, inputs may be programmed to control other functions when the
input changes state. The inputs and outputs still comply with the delay and pulse/flash
configurations as already set.
SLAVE mode
When a CLI number is designated as a SLAVE, any output states that have OUTSMS
assignments
– are sent to the ‘slave’ as OUT n ON/OFF messages – to mirror the local
output on the remote device. All other functionality is identical and managed
independently for both controllers.
Other regular notification messages are sent to CLI users as usual.
ALIAS
You can replace ControlMate commands with application-friendly words.
Lights, Pump, Generator, gate, unlock, open, start, stop etc.
Rather than typing
OUT 2 ON , you can use more meaningful words to perform the same
function. e.g. GENERATOR START