SMS ControlMate, Руководство пользователя

Страница: 11 / 56

SMS ControlMate/3G © 2016-2018 info@SL4P.net Page 11 of 56
COMMAND SUMMARY
These control and inquiry messages may be typed at the ‘setup’ terminal, or sent via SMS text
message. Requests will respond to the sender with confirmation of the action, or a brief help
message to help identify the valid commands.
If a command is not recognised, any following ‘lines’
will be ignored t avoid setting invalid states.
Virtually all configuration values interact with other settings to achieve complex results.
Always check your plan before , and re-check the settings after you make them ,
then test they operate the way you intended!
All action commands are notified back to the sender , even if the sender is not in the SMS list.
Only the bold letters are required for ControlMate to recognise the command.
Commands are not case-sensitive.
CONTROL OUTPUTS ALL USERS with ACL permission
OUT 0123 | all On/Off/tog If any CLI are set as slaves,
the output state will be
mirrored to them using
SET SLAVE / SET
OUTSMS
.
Simply turn output/relay on,
off or toggle its state.
ACL will be checked before
relay state is changed.
SHOW OPERATING VALUES ALL USERS
SHO w CLI 5 [from [to]] Takes approx. 20
secs to return
*all* records Display the list of authorised
users in the nominated range
SHO w IN puts [from [to]] Takes approx. 10
secs to return
*all* records Show a status of inputs in the
nominated range
SHO w OUT puts [from [to]] Takes approx. 10
secs to return
*all* records Show a status of outputs in
the nominated range
SHO w TIM ers [from [to]] Takes approx. 20
secs to return
*all* records Show the timer settings in the
nominated range
SHO w ALIAS es [from [to]] Takes approx. 20
secs to return
*all* records Display the command
replacement strings
SHO w SMS (Start from
cli) Show the list of IN & OUT
SMS notification assignments.
SHO ZSMS
(Start from
cli)
Display the zero counter SMS
assignments for each CL
SHO w
BUT tons
Display any assigned LCD
button commands. (option)
SHO w BOAR d Display hardware build date
and original customer name
6
SHO w SYS Displays controller information
SHO w SIM / MOD em Displays modem & SIM info
SHO w COUNT ers Displays historical counter
data since last sw update
SET COMMANDS
FOR ADMIN USERS ONLY
SET CLI VARIABLES
SET CLINUM ber cli CallerID Set authorised CallerID
number in position ‘cli’
04123345678
SET CLINAM e cli name Set a friendly-name for
position ‘cli’ e.g. John Smith
SET ADMIN cli Allow all commands
5
SHO CLI may take several seconds to return a listing, as it generates a response based on all possible users.
6
Counters, build date and customer are stored in persistent memory – not initialised by SET CLEAR