www.smoothfitness.com
21
ASSEMBLY
How to fold and unfold the treadmill
:
Your treadmill can be folded up and unfold for space saving storage. To do this follow the instructions here:
Fold Up
1. To fold the deck you first need to bring the treadmill
to the lowest incline level and then remove the
power cord
2. Lift the deck up from the rear of the treadmill and
fold up until it locks in place.
TO PREVENT INJURY
BE SURE YOU HAVE A FIRM HOLD WHEN
RAISING THE DECK.
3. You will hear a “click” sound as the lock engages.
Unfold
You can unfold the treadmill from the upright position:
1.
Begin by standing behind and supporting the deck
with your hands. Next release the lock with your foot
by stepping on the release lever.
TO PREVENT
INJURY BE SURE YOU HAVE A FIRM HOLD ON
THE DECK BEFORE RELEASING THE LOCK.
2.
Slowly lower the deck certain angle till the deck start
to lower by itself. The deck will lower slowly till it
rests securely on the ground.
PLEASE DO NOT
STAND ON THE AREA WHERE UNDERNEATH
THE DECK WHEN THE DECK LOWERING.
Horizontal Adjustment
An uneven floor or improper stabilizer level can cause
the treadmill to wobble during use as well as the incline
adjustment to function incorrectly. Please follow the
procedure described below to make sure the treadmill
stabilizer is adjusted correctly prior to use. You may
need the assistance of another person to perform this
adjustment.
First locate the two adjustable stabilizers under the
base frame. Then simply rotate them in or out to
adjust the level of the treadmill. When properly
adjusted the treadmill should sit firmly on both
stabilizers and all cushions.
Содержание 7.35 R
Страница 12: ...12 735i TREADMILL PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE ASSEMBLED ...
Страница 13: ...www smoothfitness com 13 PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE ASSEMBLED ...
Страница 14: ...14 735i TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY ...
