8
Taifun
GT one
®
The screws [D,O] for fixing the coil are screwed into the base [A].
The tank shield [J] is slid over the PSU tank [K].
The bell [I] is screwed to the PSU tank [K].
The Drip Tip [S] is placed on the Top Cap [I].
Base [A] and tank [K] are screwed together.
Done!
REPLACING THE PSU TANK
If the PSU Tank is damaged or broken, it must be replaced.
• Only use original spare parts, which can be obtained directly from www.smokerstore.de or from authorized
dealers.
• Before replacing the PSU Tank, the atomizer must be completely emptied.
REPLACING SEALING RINGS
Sealing rings are used to seal the device.
• If you notice liquid or moisture leaking out of the device, the cause may be brittle seal rings that need to be
replaced.
• Moistening the sealing rings with liquid makes the assembly easier.
A comprehensive guide can be downloaded online at
www.smokerstore.de
as a PDF. See also QR code on page 1
of this manual.
If you have further questions about attaching a coil and the individual settings of the device, please contact your
SmokerStore dealer or the SmokerStore service.
L
T
M
