background image

When using electrical appliances, basic safety precautions 

should always be followed including the following:

• For outdoor use only. Do not operate in an enclosed areas (example, porch or garage).
• Unit MUST be on the ground. Do not place unit on tables or counters. Do NOT move unit across uneven surfaces.
• Do not lift unit by rear handle.
• Do not plug in the electric smoker until fully assembled and ready for use.
• Use only an approved grounded electrical outlet.
• Do not use during an electrical storm.
• Do not expose the electric smoker to rain or water at anytime.
• CAUTION- To ensure continued protection against risk of electric shock, connect to properly grounded outlets only.
• To protect against electrical shock do not immerse cord, plug or control panel in water or other liquid.
• Do not operate any appliance with a damaged cord or plug, or after appliance malfunctions or has
  been damaged in any manner. Contact OLPI Customer Service for assistance at 1-866-475-5180.
• Keep a fire extinguisher accessible at all times while operating the electric smoker.
• Do not let cord touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Keep children and pets away from electric smoker at all times. Do not allow children to use electric smoker. 

Close supervision is necessary should children or pets be in area where the electric smoker is being used.

• Fuel, such as charcoal briquettes or heat pellets, are not to be used in the electric smoker.
• Never use the electric smoker as a heater (READ CARBON MONOXIDE HAZARD ON PAGE 2).
• Use the electric smoker only on a level, stable surface to prevent tipping.
• The electric smoker is HOT while in use and will remain HOT for a period of time afterwards. Use caution.
• Do not touch HOT surfaces. Use handles or knobs.
• Do not allow anyone to conduct activities around the electric smoker during or following its use until
  the unit has cooled.
• The use of alcohol, prescription or non-prescription drugs may impair the user’s ability to
  properly assemble or safely operate the electric smoker.
• Avoid bumping or impacting the electric smoker.
• Never move the electric smoker when in use. Allow the smoker to cool completely before moving or storing.
• Be careful when removing food from the electric smoker. All surfaces are HOT and may cause burns.
  Use protective gloves or long, sturdy cooking tools.
• Avoid using the smoker on wooden or flammable surfaces.
• Store products indoors when not in use - out of reach of children.

CALIFORNIA PROPOSITION 65

1. COMBUSTION BY-PRODUCTS PRODUCED WHEN USING THIS PRODUCT CONTAIN CHEMICALS 

KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND OTHER 

REPRODUCTIVE HARM.

2. THIS PRODUCT CONTAINS CHEMICALS, INCLUDING LEAD AND LEAD COMPOUNDS, KNOWN 

TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE 

HARM. WASH YOUR HANDS AFTER HANDLING THIS PRODUCT.

WARNING

IMPORTANT SAFEGUARDS

SAVE THESE 

INSTRUCTIONS

3

Содержание D4015B





























Отзывы: