Smoke hollow 30166E, Инструкция по сборке и эксплуатации

Страница: 7 / 16

Electric Smoker Assembly Instructions
Assembly Step 2- Legs
Locate these parts: The legs (4pcs), Hardware bag A;
Hardware bag A : 1/4-20x5/8” bolts(8pcs)
Tools: Phillips head screwdriver
1. With the cabinet in the upright position,begin by
removing the door panel from the cabinet assembly
by lifting it from the hinges. Set the door panel
aside,this will make assembly much easier.
2. For each leg, line up the holes and insert
the bolts, nuts are pre-welded to the cabinet.
3. Securely tighten the bolts.
4. Turn over the cabinet.
1. For air vent tube, line it up with back
panel holes on the inside of smoker cabinet.
3. From inside the cabinet, slide
lock washers onto bolts and thread
nuts onto bolts. Securely tighten
nuts.
Assembly Step 3- Air vent tube
2. Insert two bolts from the outside
of the cabinet.
Locate these parts: Air vent tube (1 set), Hardware bag B;
Hardware bag B : 10-24 x1” bolts(2pcs)/10-
24 flange nuts
(2pcs)
Tools: Phillips head screwdriver/ 3/8” wrench
5