background image

SMOKE-FACTORY – 

DATA II 

Operating Instructions

 

9 Warranty conditions 

 

 

For the fog machine 

DATA II 

SMOKE FACTORY guarantee is: 

 
1. Free of charge, subject to the following conditions (No. 2 - 6) we will repair any defect or 
fault in the unit if it is caused by a proven factory fault and has been advised immediately 
after appearance and within 24 month of delivery to the end user. Insignificant deviations 
of the regular production quality does not guarantee replacement rights, nor do faults 
or defects caused by water, by generally abnormal environment conditions or Force 
Majeure. 
 
2. Guarantee Service will be done in the following way: Faulty parts will be repaired or 
replaced (our chioce) with correct parts. Faulty units have to be brought to us or our 
service centres or to be sent to us or our service centres at customer‘s expenses. The 
invoice and/or receipt showing the purchase date and the serial number has to come 
with the faulty unit, otherwise this will not be guarantee service. Replaced parts become 
our property. 
 
3. The customer looses all rights for guarantee services, if any repairs or adjustments are not 
done to the units by unauthorized persons and/or if spare parts are used which are nor 
approved by us. The right of guarantee service is also lost if fluids other than Glycolwater- 
based fluids have been used or if units are sent to us with full fluid bottles. Also 
non compliance with the instructions in this manual or mistakes by incorrect handling/ 
treating of the machine will lead to a loss of guarantee and also any faults and damages 
caused by undue force. 
 
4. Certain parts of the machine are „consumable parts” and are not covered by the warranty. 
 
5. Guarantee services do not cause an extension of the guarantee time or the start of a 
new guarantee time. The warranty for replaced parts ends with the guarantee time of 
the whole unit. 
 
6. If a defect/fault can not be repaired by us in a satisfactory time, we will, within 6 months 
after sale of the unit, on choice of the customer, either: 
• replace the whole unit for free or 
• refund the lesser value or 
• take back the whole unit and refund the purchase price, but not more than the usual 
market price at the time of the refund. 
 
7. Further claims, especially for damages, losses etc. outside the unit are excluded. 
Other guarantee regulations may be valid outside Germany. Please check with your dealer! 
 

If you should send the unit for service, do not forget to remove any liquid from the 
fluid bottle.

 

 
 

 

 

 

 

 

 

SMOKE FACTORY   
 

issue 1.0    Page: 15 of. 15 

 

FOG GENERATORS  NEBELMASCHINEN

  

Содержание Data ll
















Отзывы: