SMK-Link VP3700 Blu-Link, Руководство пользователя

Страница: 13 / 40

Page 13
Step 2 : Enter setup mode by holding the device button down for
approximately 3 seconds. After 3 seconds all of the device
buttons will blink to confirm that you are in setup mode.
Step 3 : Press Rec button to enter “learning” mode.
Note : You have 20 seconds to perform each of these steps. If
you do not finish within 20 seconds, the device button light
will turn off and setup mode will be exited. Learned keys will
be retained but to learn additional keys you will need to re-
enter “learning” mode.
Step 4 : Press the key on Blu-Link™ that you wish to teach.
The device button will blink once to indicate it is ready to
learn.
Step 5 : Press and hold the key on the other remote control you
wish Blu-Link™ to learn. After about one second the device
button will blink once to indicate successful learning or 4
times to indicate that it did not learn the key.
Step 6 : Repeat from step 4 until you have learned all of the keys
you wish to teach. You can exit from learning either by waiting
20 seconds or by pressing another device key to exit.
D
VR
TV
A
UX
D
VD VCR
ENTER
+
+
CBL SA
T
ME
NU
IN
FO
EX
IT
GUI
DE
/P
OP
UP
MUTE
CLEAR
LIVE
T
V
PS3