manualshive.com logo in svg

Smithco TCV 2200 32-000, Запасные части и руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Smithco TCV 2200 32-000 Скачать руководство пользователя страница 9

7

Service

OPERATION

HILLSIDE OPERATION

Do NOT stop or start suddenly on any slope. Be especially cautious when changing direction. Do NOT operate on
slopes greater than 10°.

BATTERY

Batteries normally produce explosive gases which can cause personal injury. Do not allow flames, sparks or any ig-
nited object to come near the battery. When charging or working near battery, always shield your eyes and always pro-
vide proper ventilation.

Battery cable should be disconnected before using “Fast Charge”.

Charge battery at 15 amps for 10 minutes or 7 amps for 30 minutes. Do not exceed the recommended charging rate. If
electrolyte starts boiling over, decrease charging.

Always remove grounded (-) battery clamp first and replace it last. Avoid hazards by:

1.

Filling batteries in well-ventilated areas.

2.

Wear eye protection and rubber gloves.

3.

Avoid breathing fumes when electrolyte is added.

4.

Avoid spilling or dripping electrolyte.

Battery Electrolyte is an acidic solution and should be handled with care. If electrolyte is splashed on
any part of your body, flush all contact areas immediately with liberal amounts of water. Get medical
attention immediately.

JUMP STARTING

Use of booster battery and jumper cables. Particular care should be used when connecting a booster
battery. Use proper polarity in order to prevent sparks.

To jump start (negative grounded battery):

1.

Shield eyes.

2.

Connect ends of one cable to positive (+) terminals of each battery, first (A) then (B).

3.

Connect one end of other cable to negative (-) terminal of "good" battery (C).

4.

Connect other end of cable (D) to engine block on unit being started (NOT to negative (-) terminal of battery)

To prevent damage to other electrical components on unit
being started, make certain that engine is at idle speed before
disconnecting jumper cables.

Содержание TCV 2200 32-000























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды