![Smithco SweepStar 60 Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/smithco/sweepstar-60/sweepstar-60_parts-and-service_1305866003.webp)
1
Introduction
INTRODUCTION
Thank you for purchasing a
Smithco
product.
Read this manual and all other manuals pertaining to the Sweep Star carefully as they contain safety, oper
-
ating, assembly and maintenance instructions. Failure to do so could result in personal injury or equipment
damage.
Keep manuals in a safe place after operator and maintenance personnel have read them. Right and left sides
are from the operator’s seat, facing forward.
All
Smithco
machines have a Serial Number and Model Number. Both numbers are needed when ordering
parts. The serial number plate on the Sweep Star 60 is located on the right main frame below oil tank. Refer
to engine manual for placement of engine serial number.
For product and accessory information, help finding a dealer, or to register your product please contact us at
http:\\www.Smithco.com.
Information needed when ordering replacement parts:
1. Model Number of machine
2. Serial Number of machine
3. Name and Part Number of part
4. Quantity of parts
For easy access record your Serial and Model numbers here.
SMITHCO CUSTOMER SERVICE 1-800-891-9435
WARNING
Failure to follow cautious operating practices can re-
sult in serious injury to the operator or other persons.
The owner must understand these instructions, and
must allow only trained persons who understand these
instructions to operate this vehicle.
WARNING:
Engine exhaust and some of its constituents are
known to the State of California to cause cancer,
birth defects, and other reproductive harm.
For more information visit
www.P65Warning.ca.gov
Содержание SweepStar 60
