Smithco Spray Star 1750 Series, Запчасти и обслуживание

Страница: 87 / 104

85
Accessories
15-965 FOAM MARKER CONTROL PANEL
REF# PART# DESCRIPTION QUANTITY
1 10-739 Switch Mount Plate 1
15-725 Panel Mount End 2
2 15-782 Switch, Unlit 1
15-727 Rocker, No Light 1
3 15-918 Switch, 2 Red LED 1
15-917 Rocker, 2 Red Lenses 1
4 30-374 Decal, Foamer 1
Safety: Before working on machine: stop engine, set park brake, remove key from ignition and block
wheels. Disconnect negative (-) battery terminal.
1. Place decal(Ref 4) on Switch mount plate. Place panel mount ends in mount plate.
2. Mount switches(Ref 2 & 3) to switch mount plate(Ref 1) as shown above. Mount the switch mount
plate(Ref 1) on the side control panel using existing bolts.
Tank Mount Drawing
3. Position the Front Foamer Mount(Ref 2) and one Backing Plate on the right hand side of the mainframe
ahead of the rear axle, secure using two
3
/
8
x 3 bolts, flat washers and lock nuts. Repeat with the Rear
Foamer Mount(Ref 5).
Leave loose enough to reposition when mounting the Foamer(Refs 6-11).
4. Place Foamer unit(Refs 6-11) onto the Mounts. Using the
1
/
4
x
3
/
4
Bolts and
1
/
4
Flange Lock Nuts fasten
Foamer to Mounts. Tighten hardware.
5. Tighten hardware securing Foamer Mounts to the mainframe.