manualshive.com logo in svg

Smithco 43-000-B, Запчасти и обслуживание, Страница: 12 / 110

Поделиться
Скачать
Smithco 43-000-B Скачать руководство пользователя страница 12

10

Service

ADJUSTMENTS 

(CONTINUED)

WHEEL ‘CREEP’ ADJUSTMENT

‘Creep’ is when engine is running and hydrostatic transmission
is in neutral, but due to inadequate alignment, wheels still
move. Do the following procedures to stop this motion.

1. Lift up and support machine so all wheels are off the

ground and can turn freely.

2. On the top of the pump there is a ball bearing on a creep

arm. Loosen the bolt (A).

3. With engine running adjust the ball bearing right or left in

slot so ball bearing centers on the swash arm.

4. Tighten all fasteners and test by using foot pedal linkage

to see that the "creep" is removed.

5. Turn engine off and lower machine.

PARK BRAKE

The park brake is located on the right hand side of the machine and operates a brake
on the right rear wheel. Push lever forward to engage and pull back to disengage.

To adjust turn the knob on the end of the handle. For further adjustment you may turn
the yokes (A) clockwise to tighten and counter clockwise to loosen.

Содержание 43-000-B















































































































Отзывы:

Нет отзывов