manualshive.com logo in svg

Smithco 14270, Запчасти и обслуживание

Поделиться
Скачать
Smithco 14270 Скачать руководство пользователя страница 11

9

Service

ADJUSTMENT SPEED BOSS

RAKE LIFT CYLINDER

Completely lower Rake Lift. Remove the clevis pin (A). Twist lift linkage
(C) so clevis pin end of cylinder extension lines up with holes in attach-
ment lift arm. Replace clevis and cotter pins. Raise and lower Rake Lift
to check for proper clearance.

When the rear rake attachment is lowered while the

machine is in forward motion, the forward speed of the
machine will slow drastically. Operator should be pre-
pared for a rapid change in speed.

SPEED BOSS

Speed Boss allows the machine to operate
at a proper speed while raking sand traps
on golf courses. This speed boss has been
factory set at an average speed of 3-4
m.p.h. (5-6.5 kph). The Speed Boss will
only limit the speed while the rake is low-
ered into the operating position.

Quick Disconnect Ball Joints (A) are used
in applications where the housing needs
to be easily disconnected from the ball
stud. This is accomplished by pulling
back the spring-loaded outer housing.

The speed setting may be adjusted by
turning the  Ball Joint (A) counterclockwise
to make the machine operate slower or
turn clockwise to go faster. Tighten jam
nut.  Check to make sure nothing is bind-
ing and test drive to check desired speed.

For RBS System, Spiker and Grader Box
remove the speed boss arm and the speed
boss rod from machine so it does not interfere with other operations.spring-loaded outer housing.

The speed setting may be adjusted by  turning the  Ball Joint (A) counterclockwise to make the machine oper-
ate slower or turn clockwise to go faster.  Reconnect the ball joint. Check to make sure nothing is binding and
test drive to check desired speed.

For RBS System, Spiker and Grader Box remove the speed boss arm and the speed boss rod from machine so
it does not interfer with other operations.

Содержание 14270




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды