manualshive.com logo in svg

Smithco 10-100-D, Запчасти и обслуживание, Страница: 86 / 96

Поделиться
Скачать
Smithco 10-100-D Скачать руководство пользователя страница 86

84

Accessories

30-006 FRESH WATER WASH TANK DRAWING

 REF#  PART# 

DESCRIPTION 

QUANTITY

 

1 

10-234 

Wash Tank 

1

 

2 

16-158 

Close Nipple 

1

 

3 

16-151 

Elbow 

1

 

4 

16-960 

Spigot 

1

 

5 

HB-516-18-075 

Bolt 

5

/

16

 - 18 x 

3

/

4

 4

 

 

HWL-516 

Lockwasher 

5

/

16

 4

   HW-516 

Washer 

5

/

16

 4

 

1. Fresh Water Wash Tank mounts on the rear of all the machines.
  2.  The Bracket is already attached to the Super Boom center boom post.
  3.  Install the nipple (Ref 2), elbow (Ref 3) and spigot (Ref 4) into the bottom of wash tank (Ref 1). Use 

thread tape on all threads.

  4.  Mount the tank onto the mount bracket  using four 

5

/

16

 x 

3

/

4

 bolts, washers and lockwashers. Tighten.

  5.  Rinse tank with clear water and check for leaks around  fittings.

This tank is for fresh clear water ONLY. Do not put chemicals in this tank.

Содержание 10-100-D

































































































Отзывы:

Нет отзывов