Smithco 10-100-C, Запчасти и обслуживание

Страница: 74 / 84

72
Accessories
10-419 FRESH WATER WASH TANK DRAWING
REF# PART# DESCRIPTION QUANTITY
1* HB-516-18-075 Bolt 5 /
16
- 18 x 3 /
4
6
HWL-516 Lock Washer 5 /
16
6
HW-516 Washer 5 /
16
6
2* 15-750 Fresh Water Tank Bracket 1
3 10-234 3 Gallon Rectangular Tank 1
10-234-01 Lid
4 16-960 Spigot 3 /
4
NPT 1
5 16-151 Elbow FPT 3 /
4
x 3 /
4
1
6 16-158 Close Nipple 3 /
4
x 3 /
4
1
* Not needed for HD Booms.
1. Fresh Water Wash Tank mounts on the left side of the horizontal boom support.
2. Clamp the mount bracket to the backside of the rollbar post approximately 24" up from the mount foot.
Drill 2 holes into the tubing using a 1 /
4
" drill bit. Then use a 5 /
16
-18 tap to thread the holes.
3. Install mount bracket to rollbar post using two 5 /
16
-18- x 3 /
4
bolts, lockwashers and washer.
4. Line holes on the tank with holes on the mount bracket and use the 5 /
16
bolts to fasten tank to mount
bracket.
5. Rinse tank with clear water and check for leaks around fittings.
This tank is for fresh clear water ONLY. Do not put chemicals in this tank.