Smith Newton 2000 Series, Руководство пользователя

Страница: 19 / 40

© 2012 Smith Electric Vehicles CD-0650-0018r0
Page | 19
Charging DOs and DON’Ts
DO...
DON’T...
Charge until the CHARGE COMPLETE screen displays
on the EVIS Display.
Plug in and unplug with the vehicle switched ON.
Opportunistic charging; charge if near a charge point
(EVSE) for a short period of time
Plug in and unplug with wall socket switched ON.
Remove from charge and isolate the 24V Battery
System If the vehicle will not be used for more than 3
days.
Leave the vehicle on charge if not used for 3 days or
longer.
Leave the vehicle connected to the charge point
(EVSE), when in daily operation, until it is ready to be
driven. This will ensure maximum battery power.
Use damaged charging cables or connectors.
Run the batteries down below 20% SOC (State Of
Charge) and then charged until the EVIS Display shows
CHARGE COMPLETE every month.
EVERY MONTH the batteries MUST be run down below 20% SOC (State of
Charge) and then fully recharged until EVIS Display shows CHARGE
COMPLETE. (Figure 5.7)