SMITH Manufacturing 1-954-941-9744 www.SmithMfg.com
LNX8
VERSION 2/2017
SMITH Manufacturing 1-954-941-9744 www.SmithMfg.com
LEvELING cUttING hEad
Tools Required:
1. 3/4” socket or wrench
1. Locate a level surface for cutter adjust
-
ment. all four wheels should be on the level
surface for setup
2. Start the machine and warm the engine
up. Run at about 1/3 throttle
3. Lower the quick cam lever
4. Slowly lower the depth control knob and
at first sign of dust from the cutters, raise
the depth control knob up a couple of turns
and then lift the cam lever back up
3)
4)
LEvEL
Not LEvEL
5. Move the machine away from the current
position to see what the cut looked like. A
leveled cutting head leaves a full circle on
the surface. If the mark is off right to left or
front to back, use the elevation screws in
the front of the machine to pitch the cutter
to the correct plane to create the correct
cut pattern
ELEVATION
SCREWS
16
