7. Using 2x item #A-10 as spacers. Place panel D as shown. Confirm edges of panels D and
A align as shown. Fasten panel D with the 2x indicated fastener #13-1. Confirm edges of
panels D and A are still aligned before installing the remaining 6x #13-1 fasteners
REVISED: 3/29/2022
Document #: 179719
8. Place the previously assembled panel N as shown, ensure panel N is below the 4 mounting
tabs before sliding panel M into place.
This is the most critical step, ensure all 3 edges of
panel N are touching the corresponding edges as shown below.
Fasten panel N and M
using 8x fastener #11-1
These edges
should touch
Assembly Instructions
