Reference line
Flush with #12’s edge
These faces should be flush
Assembly Instructions
Document #: 179717
REVISED: 11/2021
7. Align item #12’s edge with the reference line as shown. Item #12 should be touching
Item #3 and the faces indicated below should be flush. Fasten #12 to top using 4x
fastener #1.
Install these two
fasteners first
Edges of panel D and A should
be flush as shown, a faming
square is recommended.
Edges of panel D and A should be flush as shown, a framing
square is recommended. Confirm at the top and bottom
edges are flush
8. Using 2x item #10 as spacers. Place panel D as shown. Confirm panel D and A edges
align as show. Fasten panel D with the 2x indicated fastener #1 first, confirm panel D and
A edges are still aligned and install the remaining 6x #1 fasteners
