Smith-Root APEX BACKPACK, Руководство пользователя

Страница: 10 / 43

10
USER’S GUIDE
2021
BATTERY COMPARTMENT
Opening the battery compartment allows
the user to install or change the battery, or
connect the anode, cathode, and control
circuit connectors (Figure 8). Remove the
battery compartment cover by flipping
the handles on the three cam-lock latches
out and turning them counterclockwise.
Make sure the latch on the bottom of the
cover is free, then pull out on the two side
latches and lift the battery compartment
cover away from the Apex.
When replacing the battery compartment
cover, adjust it so that it is on the inside of
the molded guides of the pack frame. The
cover must be correctly placed before the
Apex will operate.
Close the cover latches.
BATTERY CONNECTOR
The battery connector, located inside the
battery compartment, is a rectangular red
and black plastic connector on the end of
the input power cable (Figure 9). It mates
with an identical connector on the Apex
battery packs. This connector is color
coded and polarized to prevent accidental
reverse connections of the battery.
ANODE AND CATHODE CONNECTORS
The anode and cathode connectors are
black plastic circular 2-pin connectors
located on the bulkhead between the
battery compartment and the electronics
compartment (Figure 10). Access to
these connectors is gained by removing
the battery compartment cover. The
connectors are identical and allow the use
of a trailing cathode cable or a cathode
pole for greater control over placement
of the output electric field. Both pins in
these connectors are live when the Apex
is on. These connectors are polarized, 1/4
turn, locking connectors
CONTROL CONNECTOR
The control connector is a smaller
4-pin version of the anode and cathode
connectors (Figure 10). It is also polarized,
and the smaller size prevents incorrect
connections. The Apex utilizes a low
voltage control circuit for added safety.
BATTERY COMPARTMENT AND CONNECTIONS
Figure 8
Use Only Smith-Root, Inc. Batteries With T his Unit.
Install Batteries As Sh own Below.
Battery
Heavy-Duty Standard
#6682 #6681
Lithium Iron
Phosphate
#10765
Figure 9
Figure 10