Page 3
SM II
Assemble Extension, Shut-Off & Nozzle
1. Install the extension onto the shut-off
assembly and tighten the nut securely.
(See Figure C)
2. Install selected nozzle onto the end of the
extension and tighten securely.
(See Figure D)
ASSEMBLY INSTRUCTIONS
Assemble Hose To Tank
IMPORTANT: Do not attempt to heat or alter hose,
hose nut, or barb prior to assembly.
1. Align hose barb tabs, push hose barb into tank
until it stops
(See Figure A)
.
2. Slide hose nut into place and turn clockwise to
tighten.
(See Figure B)
.
NOTE: Do not use tools to tighten hose nut.
Figure A
Figure B
Figure C
Figure D
NOTE: BRASS NOZZLES CAN NOT BE USED ON ACID SPRAYERS.
80°
FAN
.07 GPM #4 GREEN
80°
80°
80°
80°
SPRAY
ANGLE:
SPRAY
PATTERN:
FAN
FAN
FAN
FAN
FLOW
RATE:
.10 GPM
.13 GPM
.10 GPM
.20 GPM
COLOR
#6 RED
#10 BLACK
#8 GRAY
#12 BROWN
30°
FAN
.15 GPM
SPRAY
ANGLE:
SPRAY
PATTERN:
FLOW
RATE:
70°
FAN
.25 GPM
SPRAY
ANGLE:
SPRAY
PATTERN:
FLOW
RATE:
RED HIGH VOLUME
FAN NOZZLE USES:
YELLOW LOW VOLUME
FAN NOZZLE USES:
CERAMIC CONEJET TIP
NOZZLE USES:
1. Turf and Argiculture Series (Green)
2. Industrial and Contractor Series (Orange)
3. Cleaning and Restore Series (Blue)
4. Pest Control Series (White)
Used on
1. Turf and Argiculture Series (Green)
2. Industrial and Contractor Series (Orange)
3. Cleaning and Restore Series (Blue)
Used on
1. Turf and Argiculture Series (Green)
2. Industrial and Contractor Series (Orange)
3. Cleaning and Restore Series (Blue)
Used on
ADJUSTABLE CONE USES:
1. Turf and Argiculture Series (Green)
2. Industrial and Contractor Series (Orange)
3. Cleaning and Restore Series (Blue)
4. Pest Control Series (White)
Used on